| MSP-1GE |
|
|
Description
The MSP-1GE product family is an ultra compact Carrier
Ethernet Demarcation device (Customer Premise Equipment)
with built-in OAM and test capabilities. It is available
in two models, one with 4 copper ports and 2 SFP slots,
and a higher port count model with 12 RJ-45 ports
and 4 SFP slots.
Click
here for more information on pluggable transceivers.
|
| Key Features |
| • |
Ultra compact fully managed
1GE switch - 3 side by side in 1RU
|
| • |
Ethernet OAM per 802.3ah for
enhanced link monitoring
|
| • |
Built-in performance
testing allows easy verification of critical SLA
parameters |
| • |
Supports 100/1000BaseFX
and 10/100/1000BaseT interfaces |
| • |
Mix as needed between
dual hot-swappable AC or DC power supplies |
|
|
|
| MSP-10GE-CO |
|
|
Description
Compact 10GE platform that multiplexes and transports
up to 20GE across two 10GE trunks. Additionally, the
Layer 2 switch core allows access to all services
at every node ensuring a flexible infrastructure.
Click
here for more information on pluggable transceivers.
|
| Key Features |
| • |
Scalable capacity using 2 x
10GE and 24 x 10/100/1000BaseT ports
|
| • |
Integrated switching, aggregation
and DWDM transport
|
| • |
Extensive management
options with CLI, WEB and SNMP-v2c |
| • |
Reconfigurable on
service level - add/drop new clients easily |
|
|
|
| MSP-10GE-OP |
|
|
Description
This unit is a complementary unit to the
MSP-10GE-CO as it integrates 24 1GE SFP slots instead
of copper ports. It exhibits the same Carrier Class
features as the MSP-10GE-CO but features additional
benefits when used in combination with the MSP-1GE
platform.
Click
here for more information on pluggable transceivers.
|
| Key Features |
| • |
Scalable capacity using 2 x
10GE and 24 x 1GE SFP ports
|
| • |
50ms point-to-point protection
switching to the MSP-1GE
|
| • |
Dual hot-swappable
DC power supplies |
| • |
User configurable
alert thresholds |
|
|
|
| MSP-CES OPTICAL ETHERNET + EMULATED SERVICES |
|
|
Description
IPITEK's MSP-CES model complements the MSP-10GEandMSP-1GE model by providing a modular Ethernet ADMmultiplexer that creates Metro Ethernet-based transport networks.These networks can scale to 4000 Ethernet E-Line(Pt-Pt) or E-LAN (Multipoint) circuits per network. The use ofall optical interfaces provides the ability to combine up to 24remotely located fiber-attached sites via 1GE links per siteonto a 10GE LAN Native Ethernet protected backbone,while only consuming 1RU of rack space and 80 watts of protectedDC power
Click
here for more information on pluggable transceivers.
|
| Key Features |
| • |
Scalable network capacity using multiple Gig-E ports add DS-1s, DS-3’s or OC-3’s as channelized voice |
| • |
Configure any port as trunk or client port |
| • |
Integrates switching, aggregation and DWDM transport in 1RU and low power consumption |
| • |
Ethernet MEP OAM per ITU Y.1731 |
| • |
VLAN-based routing with strict-QOS |
| • |
Point-to-point and ring protection switching supported on all ports |
| • |
Extensive management features; CLI, WEB, SNMP-v2c with in-band and out-of-band support |
| • |
QoS service routing allows differentiated services |
| • |
Dual hot-swap PSUs and dual modular fans |
| • |
Built-in media transceivers |
| • |
Mounting kit for 1RU of space with fiber mgmt |
|
|
|
